# Picoclick-C3

## Picoclick-C3

- [Introduction](https://makermoekoe.gitbook.io/picoclick-c3/introduction.md)
- [Hardware](https://makermoekoe.gitbook.io/picoclick-c3/hardware.md)
- [Extension Port](https://makermoekoe.gitbook.io/picoclick-c3/extension-port.md)
- [Software](https://makermoekoe.gitbook.io/picoclick-c3/software.md)
- [Important note](https://makermoekoe.gitbook.io/picoclick-c3/software/important-note.md)
- [Get battery voltage](https://makermoekoe.gitbook.io/picoclick-c3/software/get-battery-voltage.md)
- [Serial output](https://makermoekoe.gitbook.io/picoclick-c3/software/serial-output.md)
- [ESP-NOW](https://makermoekoe.gitbook.io/picoclick-c3/software/esp-now.md)
- [Extension Boards](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards.md)
- [Motion sensor](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/motion-sensor.md)
- [Distance sensor](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/distance-sensor.md)
- [PIR sensor](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/pir-sensor.md)
- [Light sensor](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/light-sensor.md)
- [GPIO expander](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/gpio-expander.md)
- [Encoder](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/encoder.md)
- [OLED 0.49"](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/oled-0.49.md)
- [OLED 0.69"](https://makermoekoe.gitbook.io/picoclick-c3/extension-boards/oled-0.69.md)
- [Enclosure](https://makermoekoe.gitbook.io/picoclick-c3/enclosure.md)