Picoclick-C3
  • Introduction
  • Hardware
  • Extension Port
  • Software
    • Important note
    • Get battery voltage
    • Serial output
    • ESP-NOW
  • Extension Boards
    • Motion sensor
    • Distance sensor
    • PIR sensor
    • Light sensor
    • GPIO expander
    • Encoder
    • OLED 0.49"
    • OLED 0.69"
  • Enclosure
Powered by GitBook
On this page
  • Other enclosures
  • Picoclick-C3 + motion extension
  • Picoclick-C3 + OLED 0.49" extension
  • Picoclick-C3 + PIR extension
  • Picoclick-C3 model
  • Picoclick-C3 test jig with pogopins

Enclosure

PreviousOLED 0.69"

Last updated 2 years ago

The transparent case shown above is based on the UTR-8100 (transparent) material. (Printed by PCBWay)

Other enclosures

Picoclick-C3 + motion extension

Picoclick-C3 + OLED 0.49" extension

Picoclick-C3 + PIR extension

Picoclick-C3 model

If you wanna design your own case you can start by using the 3D model of the Picoclick:

Picoclick-C3 test jig with pogopins

166KB
picoclick_c3_clear_top.stl
38KB
picoclick_c3_clear_bot.stl
61KB
pc3_ext_motion_v2.stl
50KB
pc3_ext_oled049_v1.stl
68KB
pc3_ext_pir_v1.stl
5MB
PC3_3Dmodel.stl
4MB
PC3_3Dmodel.step
51KB
pc3_pogopin_adapter_bat_v1.stl